Ellison packaged plant specification

Specification for Ellison Packaged Plant
General
The container shall be provided with adequate means for lifting and positioning into final position utilising suitable cranage.

Construction
The container shall be a double skinned insulated one-piece unit constructed to be capable of accommodating the full operating load of the installed equipment/installations (both point loads and uniformly distributed loads).
Walls
External walls are to be constructed of steel panels, complete with adequate steel vertical supporting members at suitable centres. Heavy duty galvanised channel 41mm x 41mm x 2mm gap and 6mm return to be provided within each supporting member for pipework support and electrical containment systems as required.

The steelwork frame to be generally painted with two coats air drying enamel to Colour Code BS.10A05 Goosewing Grey or equal.
Internal Finish
The steelwork frame to be as above. Silicone type sealant to be applied to panel joints where a weatherproof/air seal is required.

Ellison typical packaged plant specification